Connection of the boost pressure sensor, the hydraulic sensor and the oil temperature sensor becomes possible by connecting the GReddy intelligent information meter touch sensor adapter to information meter touch, it is possible to indicate boost pressure hydraulic oil temperature in information meter touch
I noticed that most people in Brunei are disapointed that the informeter doesn't read boost but now it can thanks to the extra sensor adaptor beside boost it also shows oil temp.
Source:
meaning with those adapter ,only those adapter then we can see the boost meter reading hmm interesting i must say. Really a must have gadget.
ReplyDeletebro, i got an informeter touch with me but didn't realize there is a sensor adapter we can use.
ReplyDeletehmmmm, am thinking whether should i invest in this.
if the price is really affordable then you might need it,just to make sure your engine is running ok.
ReplyDeleteplus we are also are waiting whether this Informeter can connect to the E manage ultimate,cos last time one of our friend cannot connect to the HKS F con V pro.
bro any update whether the informeter touch can connect to the e-manage ultimate?
ReplyDeletethe infometer can only connect to f and v manage not sure about the new version, because only the new version 1.04 can connect to the sensor adaptor wheres i got ver.1.01
ReplyDeletebro, i think we can send in our informeter touch units for firmware upgrade to the latest version.
ReplyDeletedo you have any idea how?
to update u need to send it to mutiara motors and they will send it to japan o maybe if available trade in hehe
ReplyDeleteI just had one installed in my Mazda 6 sports.
ReplyDeleteAlarm went off for water temp (which was set at 104 c)
Mazda original dashboared meter was normal.
Need to do some configuration, otherwise what's the point of having alarms going off for no reason.
it also happened to me when i set it to 100 so now i set it to 120 and no alarms yet hehe it never goes over 110 according to my peak value
ReplyDeleteAlso... I had the guy at autobacs fit it for my (not to the cigarette lighter port). Well I was looking at the manual and went back to see the cars listed. I could not see Mazda listed. So don't know what car manufacturer he chose. I am guessing there's an OEM setting.
ReplyDeletemine was also mod a bit cz i dont want to use the cig lighter plug so i just ask my mechanic to connect it to other power source.
ReplyDeletethere was a setting that didnt state an make which maybe a universal setting for cars which have obd@
I chose ISO-Scan and it did it's connecting thing.
ReplyDeleteI entered the car's min. weight (1390kg)
Max. weight is 1965kg.
When I saw this device at autobacs Hachioji I was actually looking to install defi gauges, but the salesman told me this was better - probably cheaper than the gauges and control unit.
It works fine in my 2003 Mazda Atenza Sports. (Even though the GReddy Touch website says 2006 and above.
yeah, i agree but the informeter touch is limited by what the stock ecu allows u to see, but maybe the sensor adapter is the answer to that, i just wish it was able to read a/f
ReplyDeleteSome people are disapointed that on cars like silivas it doesnt read boost not sure about the new firmware
this unit is compatible with the Emanage systems.
ReplyDeleteBloody malaysians/brunei idiots. Don't even know how to read up the GREDDY site.
u and ur shit boxes